HYDRAPAKS The RGC HydraPak is a powerful, portable hydraulic power unit that operates more efficiently and with less noise than other types of power systems. Choose from a variety of models with Briggs & Stratton and Honda gas engines or Baldor electric motors. Take one with you to any job site in the back of your pickup or van, and use it to power all of your hydraulic tools.
FEATURES OF GAS HYDRAPAKS
The HH1810 and HH2010 are both equipped with Honda engines, 0 - 10 gpm flow and three pressure settings. Compact, lightweight hydraulic power source for RGC Hydraulic tools.
Cart mounted with large 16" pneumatic tires.
Low noise level.
Easy maintenance and parts replacement.
Electric start on all models.
Vanguard STORM Gas engine with Performance Control™ electronic governor on the HV1810 and HV1858. The idle down control with delay feature eliminates speed fluctuation during intermittent use.
Controls easily accessible for safety and comfort.
Strong steel tubular frame protects unit from damage.
Detachable handles for easy transporting and storage.
Lifting hook and 6 gallon oil reservoir.
FEATURES OF ELECTRIC HYDRAPAKS
10 HP Baldor Motor.
Compact, lightweight hydraulic power source for RGC and other hydraulic tools.
Strong tubular frame protects unit from damage.
Controls easily accessible for safety and comfort.
Detachable handles for easy transporting and storage.
Lifting hook and 6 gallon oil reservoir.
Motor starter available
POWERRAM HYDRAULIC POWER UNIT MODEL 2010
An 18 HP Kohler Magnum gasoline engine powers this newly redesigned unit. A variable volume piston pump with pressure compensated control delivers up to 17 gpm at low pressures. The maximum pressure is 3000 psi.
The unit is 28" wide x 46" long x 32" high and weights 600 lbs. with 18 gallons of hydraulic oil and 6 gallons of gasoline.
POWERRAM HYDRAULIC POWER UNIT MODEL 2613
A Kohler Command 25 HP gasoline engine powers the Model 2613 Hydraulic Power Unit. This is a high performance V-Twin engine with overhead valves, hydraulic valve lifters, electronic ignition, a self-relieving choke/carburetor, oil cooler, duel element air cleaner, and many other advanced features. The Command 25 has a 12 volt solenoid-shift starter and a 15 amp charging system.
A variable volume piston pump with pressure compensated horsepower limiter control delivers 24 gpm at pressures up to 1400 psi. As the pressure rises from 1400 psi to 3000 psi, the flow drops to 11 gpm.
The unit is 29" wide x 52" long x 33" high and weights 740 lbs. with 20 gallons of hydraulic oil and 6 gallons of gasoline.
POWERRAM HYDRAULIC POWER UNIT MODEL 4000
The Model 4000 Hydraulic Power Unit is powered by a 44 HP Yanmar Diesel engine (sold and serviced worldwide by John Deere). This is a very smooth running four cylinder liquid-cooled engine designed for industrial duty.
Engine features include tachometer, hour meter, and automatic low oil shutdown.
A variable volume pump with load sense control provides 30 g.p.m. to 1800 p.s.i.; decreasing to 18 g.p.m. at 3000 p.s.i.. This allows the unit to deliver the largest volume (i.e. the most speed) over a wide pressure range.
The Model 4000 has an extra large hydraulic oil reservoir (43 gallons), with fill screen, level and temperature gauges, magnetic suction screen, and high performance return line filter with change indicator gauge. A hydraulic oil cooler protects against heat build-up.
The 19 gallon capacity fuel tank provides up to 9 hours of continuous operation at full pump speed.
All the gauges and controls, including the hydraulic system pressure gauge and battery, are visible and accessible from the operator’s side of the unit. The hood hinges up to access the fuel, radiator, engine oil, and hydraulic oil fill caps.
The Model 4000 Hydraulic Power Unit is 33" wide x 76" long x 44" high and weighs 1400 lbs..
RICE HYDRAULIC POWER PACK-HPU-9/20
The HPU-9/20 is a hydraulic driven power pack offering 9 GPM up to 2000 PSI. Unique to the RICE HPU-9/20 is the ability to self-control flow and pressure, a feature not found on any other power pack in the industry today. The adjustable GPM and PSI create endless possibilities for the operation of hydraulic tools, such as; concrete saws, breakers, chainsaws, and post pullers, to name a few.
RICE GAS POWERED HYDRAULIC SHORING PRESSURE PUMP - ST-312
RICE Hydro introduces our new gas powered hydraulic shoring pressure pump, the ST-312;it’s a SHORE-Thing! Designed for use with bio-degradable anti-freeze the ST-312 offers a 20 gallon tank reservoir, a pressure adjusting valve up to 2000 PSI with bypass relief, and NO flat polyurethane tires.
YCP, a different kind of Sales Company. We give you our best price the 1st time. We also pass on freight & Bulk Purchasing Discounts if available.
Banks charge to Process Credit Cards. ( We give our Customers an additional [3%] discount when they pay with a Wire Transfer ) Discover the YCP Difference
